20x8.5" Chevy Silverado Texas Edition 2007 Style OE 5291 Replica Chrome Wheel Rim

Manufacturer's part number: V1177-285831S

Hollander catalog part number: 5291

(Price shown is for a single wheel. If you want more than one wheel just add the desired quantity to your shopping cart)

(Direct fit for Cadillac Escalade 2002-2006, Chevy and GMC 6-lug Trucks 2wd and 4wd 1999-2016)

Note: Some Cadillac, Chevy and GMC truck models may have stock wheels and tires smaller or larger than 20" - please check your stock wheel/tire size before buying new wheels or tires

Recommended size tires (OE overall diameter):

Chevy / GMC Trucks 1999-2016: 275/55-20 - Note: Chevy and GMC truck pre-2007 models stock wheel/tire sizes are smaller than 20" and stock Chevy Tahoe and GMC Yukon 2014-2016 may have stock optional 22" wheels and tires  (check the tire size currently on our vehicle before buying new wheels or tires)

We also sell Tires and Wheel & Tire Packages!

  Vehicle Application List:  

The wheel in this listing will fit directly on all stock vehicles listed below:

(PS: Vehicles with 6-lug wheels - will not fit 5 or 8-lug trucks)

GMC Yukon / Denali 1500 (2000-2016)

  Wheel Specifications: 

Wheel Size: 20x8.5" (fits front and rear)

Wheel Construction: One piece cast aluminum alloy

Wheel Finish: Silver Machined (Powder coated and clear coated)

Lug Pattern: 6x5.50" (same as 6x139.7mm)

Offset and Backspacing: 20x8.5” wheel: +31mm offset (5.97” backspacing)

Center Bore / Hub Size: 78.1mm

Center Caps: Snap on center cap is included (as shown) - OE logo center caps or other aftermarket center caps may not fit on these wheels (If you want a logo on the center caps, we suggest you getting logo decals / stickers to put on the plain caps that come with these wheels - please contact us for more information).

Lug nuts: These wheels going on the vehicles as listed above require M14x1.5 open end acorn (conical seat) lug nuts (Not included)

We also sell Lug Nuts

Valve Stems: This wheel accepts Standard valve stem (Not included)

TPMS Sensors: This wheel accepts stock and aftermarket TPMS Sensors (Not included). You may use your stock sensors. In this case a TPMS sensor valve rebuild kit is required. Rebuilding the valve portion of the TPMS sensor insures an air tight seal. Unless a TPMS triggering tool is purchased, new TPMS sensors must be initialized at a Tire Shop that has a triggering tool or at the dealer. (If you install wheels with standard valve stems (without TPMS sensors) the vehicle's TPMS warning lights will stay permanently illuminated)